Tel: 0114 249 5060
Fax: 0114 249 5061
An accredited engineering company with 40 ton lifting capability, a workforce with the experience of machining a variety of different materials from carbon steels to stainless alloys and bronze castings.
Quality Accreditation to ISO 9001-2015
Make an Enquiry
Manual
Horizontal Boring |
|
| Asquith Floor Borer | |
| Spindle Height | 3.3 Metres |
| Cross Travel | 9.3 Metres |
| Longitudinal | 2.0 Metres |
| Kearns Richard Se 150l | |
| Spindle Height | 2.4 Metres |
| Cross Travel | 2.8 Metres |
| Longitudinal | 2.2 Metres |
| Kearns Richard Se 150s | |
| Spindle Height | 1.5 Metres |
| Cross Travel | 1.5 Metres |
| Longitudinal | 2.2 Metres |
| Kearns Richard Se 150m | |
| Spindle Height | 1.8 Metres |
| Cross Travel | 1.8 Metres |
| Longitudinal | 2.2 Metres |
| Kearns Richard Sf 125 | |
| Spindle Height | 1.5 Metres |
| Cross Travel | 2.4 Metres |
| Longitudinal | 2.2 Metres |
| Union 125 | |
| Spindle Height | 2.2 Metres |
| Cross Travel | 3.0 Metres |
| Longitudinal | 1.8 Metres |
| Kearns Richard 100 | |
| Spindle Height | 1.5 Metres |
| Cross Travel | 1.8 Metres |
| Longitudinal | 2.0 Metres |
Slotting |
|
| Butler | 21" |
Vertical Boring |
|
| Schiess | |
| Max Dia (with Jaws) | 2.0 Metres |
| Max Dia (without Jaws) | 2.3 Metres |
| Max Height | 1.6 Metres |
| Niles | |
| Max Dia (with Jaws) | 1.7 Metres |
| Max Dia (without Jaws) | 1.9 Metres |
| Max Height | 2.1 Metres |
| 3ft Webster Bennett | |
| Max Dia | 48" |
| Max Height | 22" |
| 4ft Webster Bennett | |
| Max Dia | 60" |
| Max Height | 48" |
Centre Lathe Turning |
|
| Dean Smith & Grace Type 30 | |
| Swing Over Bed | 762mm |
| Swing Over Saddle | 584mm |
| Max Length | 4267mm |
| Dean Smith & Grace Type 25 | |
| Swing Over Bed | 625mm |
| Swing Over Saddle | 381mm |
| Max Length | 2134mm |
Machining a variety of castings such as Ballast Valves, Propeller Shaft Supports and Hull Structure Supports made from carbon and stainless steels.
Manufacture of new and replacement piece parts, Plant upgrades, Tooling packages and on site support.
Machining of valves in sizes from 1 to 15 ton in carbon steel, stainless steel and bronze materials of all grades.
Machining of fabricated Drive Frames, Tension Frames, Conveyor systems and Cutter Heads mostly from mild steel and hardox materials.